User`s manual

53
-DMZ Host
Once a PC on a LAN is set as a DMZ host, it can implement network communication with
Internet without limit.
 DMZ Host IP Address: the IP address of a PC to be set as a DMZ host. DMZ host
must be connected to the router’ s LAN port.
Note: The router’ s firewall can not have effect on the DMZ host once it is enabled. So
network security problem may occur. Thus we recommend you to enable this function only
when necessary and delete the corresponding settings as soon as you are not using it.
For example: If you want the PC at the IP address of 192.168.1.100 from your router’ s
LAN side to be shared by Internet users for data and other resources. For configurations,
follow the instructions below:
Click “ Advanced Setup” ----“ NAT” ---“ DMZ Host” to configure the page below:
Supposing that the router’ s WAN IP address is 183.37.227.201, then the Internet user
only needs to enter http：//183.37.227.201 in Web browser address field to access your
Web server.