User`s manual

 Enable/ Disable DHCP Server: Click the corresponding button to enable/ disable the

DHCP Server.

 Start IP: The point from which DHCP server starts IP address distribution.

 End IP: The point where DHCP server ends IP address distribution.

 Lease Time: It indicates the valid time of the dynamic IP address which is distributed to

the client’ s host computer by DHCP server. During this time, the server will not

distribute the IP address to any other host computer.

Note:

To use the Router’ s DHCP server function, you must set the TCP/IP protocol of the

computers in LAN to “ Obtain an IP address automatically” .

-DHCP client

This page displays DHCP client’ s information such as host name, MAC address, IP

address, and lease time.

 Hostname: The name of a PC or a network device that has successfully obtained an

IP address from the DHCP server.

 MAC Address: The MAC address of a PC or a network device that has successfully

obtained an IP address from the DHCP server.

 IP Address: The IP address distributed by DHCP server.