User`s manual

46
You can access Internet once the configured connection succeeds.
4.3.8 LAN
You can change the IP address of the LAN port to match the requirement of the practical
network environment.
To enter the screen below, click “ Advanced Setup” ----“ LAN” .
 IP Address: It is the Router’ s LAN IP address. The default IP address is 192.168.1.1.
 Subnet Mask: It is the Router’ s LAN subnet mask. You can modify it according to
your needs.
 Enable IGMP Snooping: Check/uncheck to enable/disable the IGMP Snooping.
Note:
If you have changed the LAN IP address, then you must re-configure your PC’ s IP
address to log on to the router’ s Web-based management interface, and the default
gateway of all computers that connect to the router’ s LAN ports have to be set to the new
IP address for normal Internet access.
4.3.9 DHCP setting
-DHCP Server
This router enables DHCP server function by default. DHCP refers to Dynamic Host
Control Protocol. With an internal DHCP server, the Router can automatically configure the
IP addresses, subnet mask, gateway and DNS server, etc for the computers that connect
to the router’ s LAN ports and are configured to obtain an IP address automatically.
Therefore it reduces the inconvenience and trouble in manually configuring IP address and
other network parameters for multiple computers in LAN.