User`s manual

40
Page 2
 PPP User Name: User name for PPPoE dialup. It is provided by your ISP.
 PPP Password: The password provided by your ISP for PPPoE dialup.
 PPPoE Service Name: it is provided by your ISP. Do not fill it in if you don’ t have it;
otherwise PPPoE dialup may fail
 Authentication Method: it is used by ISP to verify its clients during PPPoE dialup.
Select “ Auto” if you are not sure about it.
 Clone MAC：This feature clones the MAC address of the PC that is currently entering
the router’ s management page to work as the WAN MAC address of the router.
Configure it when your ISP requires a fixed MAC for your Internet access.
 Dial on Demand: Automatically connects or disconnects Internet according to the use
of the network. It is recommended when your ISP limits network use time. This feature
can help you to save the Internet fee.
 PPP IP extension: The IP addresses of all packets including management packets that
egress WAN port will be converted to the WAN port’ s IP address once this feature is
enabled.
 Enable PPP Debug Mode: This feature can be enabled only when supported by your
ISP.
 Bridge PPPoE Frames Between WAN and Local Ports：PPPoE dialup frame initiated
by LAN port will directly egress WAN port without being modified if this feature is