User`s manual

You only need to check the wireless network that you want to bridge with and click the

“ Apply/Save” button. And system will automatically establish wireless bridge with the

remote device for you.

Disabled: To disable wireless bridge function, select this option.

Note:

To use the wireless bridge function, both devices must support the function. Besides,

SSID, channel, encryption method and key of one device must be set to the same

value of its link partner’ s.

4.2.5 Station Info

This page shows authenticated wireless stations and their status.

4.3 Advanced Setup

Enter the setup wizard screen below and then click “ Advanced Settings” on the upper

right corner as shown in the below:

After you enter the advanced settings screen, you can set the advanced settings for the

router to satisfy your requirements. There are seven main menus on this screen: Device

Info, Advanced Setup, Wireless, Diagnostics, Management, Exit and Back to wizard as

shown in the below picture.

4.3.1 Advanced Setup

Advanced Setup: Consists of 14 submenus including Connection Mode/ WAN

Service/LAN/DHCP Setting/NAT/Security/Time Restriction/Quality of