User`s manual

4. PC: Interface for connecting 3-to-3 KVM cable from SP1200A to PC or

KVM switch (SP218D/SP226D).

5. Local Console: Interface for connecting to mouse, keyboard and monitor.

6. RS232: Connect to external modem via RS232 for serial console access.

7. LAN: Port for connecting to existing network or router for remote access

over Internet.

2.3 Hardware Installation

Step 1. Connect the Monitor/Keyboard/Mouse to the local console section on

the rear of the device.

Step 2. Use the 3-to-3 KVM cable provided to connect SP1200A’s PC section

to a KVM switch or PC.

Step 3. Connect SP1200A to a network (switch/router) via the LAN port

provided using R-45 cable.

Step 4. Attach the power adapter to the power jack of the device to activate.