User`s manual

4.7.4 Unit Reset

This section allows you to reset specific parts of the device. This involves the

both keyboard and mouse, the video engine and the SP1200A itself. Resetting

the card itself is mainly needed to activate a newly updated firmware. It will

close all current connections to the administration console and to the Remote

Console. The whole process will take about half a minute. Resetting sub

devices (e.g. video engine) will take few seconds only and does not result in

closing connections. To reset a certain SP1200A functionality click on the

button <Reset>. Only the super user is allowed to reset the SP1200A.