User`s manual

will be used. If set to ”Try”, the applet tries to make an encrypted connection.
In case connection establishment fails for any reason an unencrypted
connection will be used. If set to “Force” the applet tries to make an encrypted
connection with certificate. An error will be reported in case connection
establishment fails.
Group-based System Access Control
This is the IP filtering function that keeps unauthorized hosts from accessing to
the SP1200A by specifying IP filtering rules. It is important to fully understand
what an IP filter is. If you don't fully understand this, you will get unexpected
results against your original planning.
The Chain rule determines whether the access from the hosts is allowed or not.
It can be one of these two values:
¾ ACCEPT: access allowed.
¾ DROP: access not allowed.
The rule can be configured to apply to a particular Group level (All, User,
Super, Administrator). When the SP1200A receives a TCP packet, it will
process the packet with the chain rule depicted below. The process ordering is
important. The packet will enter the chain rule 1 first, if meet the rule then take
action directly, otherwise go to chain rule 2.
55