User`s manual

4.6.1 Network
The Network Settings panel allows changing network related parameters.
Each parameter will be explained below. Once applied the new network
settings will immediately come into effect.
Parameter Description
IP auto configuration
With this option you can control if the SP1200A should fetch
its network settings from a DHCP or BOOTP server. For
DHCP, select “dhcp” , and for BOOTP select “bootp”
accordingly. If you choose “none” then IP auto configuration is
disabled.
Preferred host name
Preferred host name to request from DHCP server. Whether
the DHCP server takes the SP1200A’s suggestion into
account or not depends on the server configuration.
IP address IP address in the usual dot notation.
Subnet Mask The net mask of the local network.
Gateway IP address
In case the SP1200A should be accessible from networks
other than the local one, this IP address must be set to the
local network router's IP address.
Primary DNS Server IP
Address
IP address of the primary Domain Name Server in dot
notation. This option may be left empty, however the
SP1200A will not be able to perform name resolution.
51