User`s manual

Step 6. Open the remote console and you will see a virtual Floppy drive is
created on the host computer that connects to SP1200A.
Users may create a floppy image size up to 1.44Mb. This drive would be in
read-only mode and would not allow users to write any information on this
drive but copying only. This drive would be bootable under DOS mode if the
motherboard/BIOS on the host computer supporting USB BOOTABLE function.
If using other image-creator software, the output image extension file name
has to be ‘img’, e.g. floppy_vir.img. The uploaded image file will be kept in the
onboard memory of the SP1200A until the end of the current session, as you
logged out, or initiated a reboot of the SP1200A.
34