User`s manual

102 or VT 220 terminal or an according emulation, it is even possible to
perform a console redirection as long as the SP1200A host machine is using a
text mode screen resolution.
Connecting to the SP1200A is done as usual and as required by the Telnet
client, for instance in a UNIX shell:
telnet 192.168.0.70
Replace the IP address by the one that is actually assigned to the SP1200A.
This will prompt for username and password in order to log into the device.
The credentials that need to be entered for authentication are identical to
those of the web interface. That means, the user management of the Telnet
interface is entirely controlled with the according functions of the web interface.
Once you have successfully logged into the SP1200A a command line will be
presented and you can enter according management commands. In general,
the Telnet interface supports two operation modes: the command line mode
and the terminal mode. The command line mode is used to control or display
some parameters. In terminal mode the pass-through access to serial port 1 is
activated (if the serial settings were configured accordingly). All inputs are
redirected to the device on serial port 1 and its answers are displayed on the
Telnet interface.
Parameter Description
help Displays the list of possible commands.
cls Clears the screen.
quit Exits the current session and disconnects from the client.
version Displays the release information.
terminal
Starts the terminal pass through mode for serial port 1. The
key sequence ESC exit switches back to the command mode.
30