User`s manual

Step 1. In the control panel, double

click on Network Connections.

Double click on the local area

connection (e.g. LAN). The following

screen will appear. Highlight ‘Internet

Protocol (TCP/IP)’ and click on

‘Properties’.

Step 2. Select ‘Internet Protocol

(TCP/IP)’, and then click on the

<Properties> button. The screen will

appear to allow entry of TCP/IP settings.

Step 3. In DOS command, type ‘ipconfig’ to view information on LAN

connection. Ensure the IP address and subnet mask are on the same subnet

as the IP KVM Switch.