User`s manual

3.3.2 Remote Mouse Settings
A common seen problem with KVM devices is the synchronization between
the local and remote mouse cursors. The SP1200A addresses this situation
with an intelligent synchronization algorithm. There are two mouse modes
available on the IP KVM:
Parameter Description
Auto mouse speed
The automatic mouse speed mode tries to detect the speed
and acceleration settings of the host system automatically.
See the section below for a more detailed explanation.
Fixed mouse speed
This mode just translates the mouse movements from the
Remote Console in a way that one pixel move will result in n-
pixel moves on the remote system. This parameter n is
adjustable with the scaling. Please note that this works only
when mouse acceleration is turned off on the remote system.
Automatic mouse speed and mouse synchronization
The automatic mouse speed mode performs the speed detection during
mouse synchronization. Whenever the local and remote mouse cursors move
asynchronously, there are two ways for re-synchronizing local and remote
mouse cursors:
Parameter Description
Fast Sync
The fast synchronization is used to correct a temporary, but
fixed skew. Choose the option using the Remote Console
options menu or press the mouse synchronization hotkey
sequence in case you defined one.
Intelligent Sync
If the fast sync does not work or the mouse settings have
been changed on the host system, use the intelligent
resynchronization. This method takes more time than the fast
one and can be accessed with the appropriate item in the
Remote Console option menu. The intelligent synchronization
requires a correctly adjusted picture. Use the auto adjustment
function to setup the picture, and make sure that there are no
window at the top left corner of the remote desktop that are
able to change the mouse cursor shape from the normal
state. The Sync mouse button on top of the Remote Console
can behave differently, depending on the current state of
mouse synchronization. Usually pressing this button leads to
a fast sync, except in situations where the KVM port or the
video mode changed recently.
10