User`s manual

Chapter 3 Configuration

3.1 PSetup Utility

There is a Network Setup Software tool (PSetup) for setting up the network

configuration (IP address, Subnet mask, DHCP, etc). It is useful when you

want to change the network settings or you can not access to the unit due to

not knowing the network settings of the unit. In this case, you can view or

change the settings via this utility. The setup tool PSetup can be found on the

CD ROM delivered with this package. If you have installed the SP1200A on a

network that enables DHCP, you can use the PSetup to find out the IP KVM’s

IP. Users can follow the procedures described below.

Step 1. Plug Ethernet cable to SP1200A. The IP KVM will get an IP via DHCP.

Step 2. Initiate the ‘psetup.exe’ on product CD. Click <Refresh Devices>

button to detect connected devices

Step 3. Select MAC address of the SP1200A in “Device MAC address” box.

Users can find the MAC address labeled on the bottom side of I-BOX. MAC

address is detected as connection from computer and SP1200A is valid

through USB or network.

Step 4. Click <Query Device> to find the IP configuration on the right pane.