Owner`s manual

PlatinumNAS Owner’s Manual
32
5. System Control Functions
The system control functions, accessible from the “System”
menu, facilitate the following functions via submenus:
Remote Notification Configuration
Event Logs
System Time
Save/Recover System Setting
Configure Add On Modules
Reset PlatinumNAS to factory default
Upgrade Firmware
Change Administrator Password
Reboot/Shutdown
Schedule On/Off
Logout from the Administration Interface
Change the user Interface Language
5.1 Remote Notification Configuration
The PlatinumNAS features an SMTP manager, and can send email notifications for various
subsystem conditions in addition to the audible buzzer. The following table discuss each
attribute’s descriptions.
Beep Notification Enable or Disable system beeper that beeps when a problem
occurs.
Email Notification Enable or Disable e-mail notification of system problems.
SMTP Server The SMTP (Simple Mail Transport Protocol) server is an
external server that relays your network’s outgoing mail.
Enter your network’s SMTP server’s network IP address in
this field. If you do not know your SMTP server’s IP address,
consult your network administrator.
SMTP Port Enter your SMTP servers port number (usually 25.) If you do not
know your server’s SMTP port, consult your network administrator.
Authorization Type SMTP Authorization type. Consult your network administrator
for more information.
SMTP Account ID Set SMTP account ID. This may be required to authenticate
the PlatinumNAS to the SMTP server. Some SMTP servers do
not require a user ID and password- consult your network
administrator for more information.
Account Password SMTP account password. May be required.
Confirm Account password Confirm the password for SMTP Account.
Recipients’ Email
Addresses
Recipients’ (up to 4) e-mail addresses for notification of
system events.
When all desired options are entered, click (Apply) Button to confirm, or (Cancel) to abort.
3-Administering the PlatinumNAS
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
5.10
5.11 5.12