User guide

Boat show
Used for demonstration purposes only, this function allows the
display of information when the Wind Display is NOT installed
as part of a Micronet system. The options are: Off / On.
LCD contrast
Adjusts the contrast of the LCD display to optimise visibility.
The available values are: 1 - 7, default 4.
Pointer
Pressing switches the pointer tail on or off.
Reset
Returns all settings to their default values.
Health chapter
Display status
The software version of the Wind Display is shown on the top
line of the display.
If the display is the "Master" (see page 7), the number of items
(nodes) in the system is shown on the bottom line. Otherwise,
the signal strength to the "Master" is shown.
System status
Shows the software version (before the decimal point), signal
strength (after the decimal point) and battery condition (level
and charge rate) for the transmitters connected to the system
Entry Level Wind System
4
www.tacktick.com
English
Text identifies the transmitters as follows:
HULL - Hull Transmitter
WIND - Wind Transmitter
NMEA - NMEA Interface
MAST - Mast Angle Sensor
MOB - Man overboard Transmitter