User guide

Setup Chapters and Pages
3
www.tacktick.com
English
Setup Chapters and Pages
In the Page descriptions below, default settings are shown in bold.
Units chapter
Wind speed units
Sets the units in which Wind Speed is displayed. The options
are: KTS (Knots) or M/S (meters per second).
Wind chapter
Wind angle
A calibration function used to ensure the displayed apparent
wind angle is correctly aligned with the actual wind angle with
respect to the boat. See page 6 for the calibration process.
Wind speed
A calibration function used to ensure the displayed wind speed
is correct.
Options chapter
Auto networking
Used to add additional devices to the Micronet network.Refer
to www.tactick.com for details.
Keylock
Enables or disables the Keylock function, which can protect
against accidental presses. The options are: Off / On
Backlight control
Configures the display to control the system Backlighting or just
its own Backlighting. The options are: nEt (network) / LOC
(local).
Master
To configure your system to switch on automatically when the
power is switched on at the main panel, set to ON. The default
is OFF.
Warning:
if you have more than one Micronet display you
must ensure that only one of these displays has the
Master parameter set to ON.