Specifications

No NMEA data showing on external displays.

From any display enter setup and calibration mode (page 13) and scroll

through to the Health chapter. Check the signal level and battery status

of the Wireless (NMEA) Interface box.

Lost Network Alarm Sounds

Indicates that the display has lost communication with the

master. Either there is a problem with the master* or the

display has been moved out of effective range. The display

will power down shortly after sounding the alarm in order to

conserve power.

Note: * The "Master Instrument" is the display which was used to power up the

entire system. This display may be different each time the system is

used. If you are fault finding and are uncertain which display is the

master the switch off the system and switch on again. The display which

you switched on is now the master.

mn100 Analogue Display