User`s guide

Configuring
3-13
Physical Drives
Create Pass Through Disk
Delete Pass Through Disk
Identify Selected Drive
Select The Drives
Select The Drives
Select The Drives
Delete Pass Through
Are you sure?
Yes, No
Select The Drives
Modify Pass Through Disk
View Drive Information
SAS Port#, LUN Base,
SAS LUN, Cache Mode,
Tag Queuing
Select The Drives
SAS Port#, LUN Base,
SAS LUN, Cache Mode,
Tag Queuing
Yes, No
Mute The Alert Beeper
Raid System Function
Alert Beeper Setting
Change Password
Background Task Priority
Update Firmware
Restart Controller
Disabled, Enabled
Enter New Password
Re-Enter Password
Save The Password
Save The Settings
Yes, No
UltraLow(5%), Low(20%),
Medium(50%),High(80%)
Are you sure?
Yes, No
Yes, No
Yes, No
JBOD / RAID Function
RAID, JBOD
Configured AS JBOD?
Are you sure?
Yes, No
Yes, No
Yes, No
SATA NCQ Support
Enable, Disable
Disk Write Cache Mode
Auto, Enabled, Disabled
Capacity Truncation
To Multiples of 10G,
To Multiples of 1G,
Disabled
HDD Read Ahead Cache
Enable, Disable Maxtor,
Disable
Stagger Power on
0.4, 0.7, 1.0, 1.5, 2.0, 2.5,
3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0
Identify Enclosure
Select The Enclosure
Controller Fan Detection
HDD SMART Status Polling
Disabled, Enabled
Save The Settings
Yes, No
Enabled, Disabled