User`s guide
Configuring
3-44
Choose “Add” operation, then Confirm/Submit to complete the add operation.
The added host will be shown in the upper half of the Config Frame. Up to 20
hosts can be added.
To delete a host from the list, select the radio button in front of the host list.
Choose “Delete” operation, then Confirm/Submit to complete the delete operation.
Once volumes are created and the host name list is established, Volume Set Host
Filters can be specified by clicking “View/Edit Volume Set Host Filters” link at
bottom of “Fibre Channel Config” page. Volume Set Host Filters can also be speci-
fied by clicking “Volume Set Functions”
“Volume Set Host Filters” from the
Menu Frame. Select the volume for LUN masking and then click the submit button.