User`s guide

Getting Started
2-5
5. Environment status
Function
If the output DC voltage is over or under +3.3V, +5V or +12V, an
alarm will sound warning of a voltage abnormality and this LED will
turn red. (+3.3V: +-5%, +5V: +-5% , +12V: +-10%)
If temperature irregularity in these systems occurs (HDD slot tem-
perature over 55
o
C), this LED will turn red and an alarm will sound.
When a fan’s rotation speed is lower than 2600rpm, this LED will turn
red and an alarm will sound.
If a redundant power supply fails, this LED will turn red and an alarm
will sound.
Green LED indicates power is on.
Blue blinking LED indicates data is being accessed.
Parts
Voltage warning
LED
Over temp
LED
Fan fail LED
Power fail LED
Power LED
Access LED
Function
Use the Up or Down arrow keys to go through the information on
the LCD screen. This is also used to move between each menu
when you configure the subsystem.
This is used to enter the option you have selected.
Press this button to return to the previous menu.
Parts
Up and Down
arrow buttons
Select button
Exit button
4. Smart Function Panel - Function Keys for RAID configuration
The smart LCD panel is where you will configure the RAID subsystem. If you
are configuring the subsystem using the LCD panel, please press the controller
button to configure your RAID subsystem.