User manual

Fibre to SAS/SATA II RAID Subsystem
User Manual
67
5.3.2 Create Raid 30/50/60
To create a Raid30/50/60 Volume Set, move the mouse cursor to the main menu and
click on the Create Raid30/50/60 link. The Select Multiple RaidSet For
Raid30/50/60 screen will show all Raid Sets. Tick on the R aid Sets that you want
to include in the creation and then click on the Submit button.
NOTE: When creating Raid 30/50/60 Volume set, you need to
create first the Raid Sets. Up to 8 Raid Sets maximum is supported
in Raid 30/50/60. All Raid Sets must contain the same number of
disk drives.
Configure the Volume Set attributes (refer to previous section for the Volume Set
attributes). When done, tick Confirm The Operation and click on Submit button.
NOTE: Refer to Section 5.3.1 Create Volume Set for detailed
information about the Volume Set settings.