User manual

Fibre to SAS/SATA II RAID Subsystem
User Manual
39
9. Now, the VT100 is ready to use. After you have finished the VT100 Terminal setup,
you may press the “X” key (in your Terminal) to link the RAID subsystem and
Terminal together. Press “X” key to display the disk array Monitor Utility screen on
your VT100 Terminal.
10.
The Main Menu will appear.
Keyboard Function Key Definitions
“A” key - to move to the line above
“Z” key - to move to the next line
“Enter” key - Submit selection function
“ESC” key - Return to previous screen
“L” key - Line draw
“X” key – Redraw