User manual

Fibre to SAS/SATA II RAID Subsystem
28
User Manual
Part Description
Host Channel A, B
There are two Fibre host channels (A and B)
which can be use to connect to Fibre HBA on
the Host system, or to connect to FC switch.
SAS Expansion Port
Use for expansion; connect to the SAS In
Port of a JBOD subsystem.
Debug Port
RJ-11 port; Use to check controller debug
messages.
Monitor Port
RJ-11 port; Use to manage the RAID
subsystem via serial terminal console.
R-Link Port
10/100 Ethernet RJ-45 port; Use to manage
the RAID subsystem via network and web
browser.
Indicator LED Color Description
Green
Link LED: Indicates Host Channel has
connected or linked.
Host Channel
A, B
Status LEDs:
Link LED and
Activity LED
Blink
Blue
Activity LED: Indicates the Host Channel is
busy and being accessed.
Green Indicates expander has connected or linked.
SAS Expander
Activity LED
Blue
Indicates the expander is busy and being
accessed.
Fault LED
Blink
RED
Indicates that controller has failed.
Blink
Green
Indicates that controller is working fine.
CTRL
Heartbeat LED
Solid
Green
Indicates that controller is hung.
In replacing the failed Controller Module, refer to section 6.3.1 of this
manual.