User manual

Fibre to SAS/SATA II RAID Subsystem
User Manual
23
2.1.1.2 LCD Front Panel
Smart Function Front Panel
The smart LCD panel is an option to configure the RAID subsystem. If you are
configuring the subsystem using the LCD panel, press the Select button to login and
configure the RAID subsystem.
Parts Function
Up and Down
Arrow buttons
Use the Up or Down arrow keys to go through
the information on the LCD screen. This is also
used to move between each menu when you
configure the subsystem.
NOTE: When the Down Arrow button
is
pressed 3 times, the LCD control will shift to
the other RAID controller (in redundant
controller mode) and the other RAID
controller’s IP address will be shown in LCD.
Select button
This is used to enter the option you have
selected.
Exit button EXIT
Press this button to return to the previous
menu.
NOTE: This button can also be used to reset
the alarm beeper. For example, if one power
supply fails, pressing this button will mute the
beeper.