User manual

Fibre to SAS/SATA II RAID Subsystem
130
User Manual
5. If the Disk in Eclosure#1 Slot#1 is still good, the Disk in Slot#1 of Enclosure#1
will be turned on. The Raid Set and Volume Set will be rebuilt automatically. The
Volume Set state will show “Rebuilding”.
IMPORTANT: If the disk is really failed and cannot power on,
replace the failed disk with a new one.
If the failed disk is still good, observe this particular disk. If this
disk fails again, replace it with a new one.
Use the disk manufacturer’s utility/disk tool to verify the health
status of the failed disk.