User manual

Fibre to SAS/SATA II RAID Subsystem
User Manual
127
2. To power off the Disk in Slot#1 of Enclosure#1, select “Rescue Raid Set”
under RAID Set Functions. In the Enter The Keyword box, type “PowerOffDisk”,
press space bar, and then type “Enclosure#1 Slot#1”. The contents of “Enter
The Keyword” box will become “PowerOffDisk Enclosure#1 Slot#1”. Tick
“Confirm The Operation” and click “Submit”.
NOTE: Sometimes the “PowerOffDisk” command will need to wait
for several seconds before command execution is completed (web
GUI is updated), specially when the Raid subsystem is active or
busy.
NOTE: If you try to power off a Disk, for example Disk in Slot#3 of
Enclosure#1, but the Disk is not failed
the Disk will not be
powered off. The screen will show “Device Not In Failed State”.