User manual

Fibre to SAS/SATA II RAID Subsystem
User Manual
125
7. Tighten the two thumbscrews of the controller.
NOTE: When the thumbscrews are tightened, the FLT LED will be
off and one short beep will be heard. This means the controller
status is OK.
An alarm will still sound. In this time, the reinserted controller will
take over the original IO jobs.
8. After the reinserted controller has taken over its original jobs, the
alarm sound will be off. Both controllers will be back to normal operational
mode.
IMPORTANT: The thumbscrews must be tightened
so that the FLT
LED will be off and the controller status
will become OK.