User manual

Fibre to SAS/SATA II RAID Subsystem
100
User Manual
The Controller Name, Firmware Version, Serial Number, Main Processor, CPU
Data/Instruction Cache size, System Memory size/speed, Current IP Address, SAS Address,
Target Mode SAS Chip, Device Mode SAS Chip, SAS Expander Chip, Host Port Link Status,
JBOD Port Link Status, and Dual Controller State appear in this screen.
The following are the states under Dual Controller State:
Dual Controller State Description
Single Controller is running at Single Mode.
Other Controller Added The other Controller is added and waiting to start.
Other Controller Booting The other Controller is starting up.
Other Controller Ready The other Controller has booted up and ready.
Other Controller Failed The other Controller is Failed.
Sync Controller State
The two Controllers are synchronizing their
configuration or state.
Sync Controller Cache
The two Controllers are synchronizing the data in
their cache memory.
Dual Operational The Controller is running.
Initialize The boot up state when Dual Controller starts up.