Specifications

Setting the Flags on Each Server
failure. It will only block failovers due to local resource failures.
Setting the Flags on Each Server
1. Log in to the LifeKeeper GUI and select a server in your cluster. If the Properties panel option
is selected on the View menu, the Properties panel will display (on the right side of the GUI).
On the General tab in the bottom of the panel, your system configuration will
bedisplayed:
2. In the Set Confirm Failover On column, select the checkbox for each server in the cluster
that you want confirmation on.
In the example above, ServerA properties are set to confirm failover on ServerB from
ServerA. In order to set Confirm Failover on ServerA from ServerB, you will need to go into
ServerB properties and check the box next to ServerA.
280Installation and Configuration