Specifications

CommPaths Tab
CommPaths Tab
l Server. The server name of the other server the communication path is connected to in the
LifeKeeper cluster.
l Priority.The priority determines the order by which communicationpaths between
twoservers will be used. Priority 1 is the highest and priority 99 is the lowest.
l State. State of the communications path in the LifeKeeper Configuration Database (LCD).
These are the possible communications path state values:
l ALIVE - functioning normally.
l DEAD - no longer functioning normally.
l UNKNOWN - state could not be determined. The GUI server may not be available.
l Type.The type of communications path, TCP (TCP/IP) or TTY, between the server in the list
and the server specified in the Server field.
l Address/Device. The IP address or device name that this communications path uses.
l Comm Path Status. Summary communications path status determined by the GUI based on
the state of the communications paths in the LifeKeeper Configuration Database (LCD).
188User Guide