Specifications

Viewing Server Properties
ALIVE
Client has valid connection to the server.
Comm paths originating from this server to an ALIVE remote server are
ALIVE.
Comm paths which may be marked DEAD and which target a DEAD
server are ignored because the DEAD server will be reflected in its own
graphic.
ALIVE
Client has valid connection to the server.
One or more comm paths from this server to a given remote server are
marked as DEAD.
No redundant comm path exists from this server to a given remote server.
DEAD Reported as DEAD by other servers in the cluster.
UNKNOWN Network connection was lost. Last known LifeKeeper state is ALIVE.
Viewing Server Properties
1. There are two possible ways to begin.
l Right-click on the icon for the server for which you want to view the properties. When
the Server Context Menu appears, click Properties.Server properties will also be
displayed in the Properties Panel if it is enabled when clicking on the server.
l On the Edit Menu, point to Server and then click Properties. When the dialog comes
up, select the server for which you want to view the properties from the Server list.
2. If you want to view properties for a different server, select that server from the dialog's Server
list.
3. When you are finished, click OK to close the window.
Viewing Server Log Files
1. There are four ways to begin.
l Right-click on a server icon to display the Server Context Menu, then click View Log to
bring up the LifeKeeper Log Viewer Dialog.
l On the Global Toolbar, click the View Log button, then select the server that you want
to view from the Server list in the LifeKeeper Log Viewer Dialog.
l On the Server Context Toolbar, if displayed, click the View Log button.
SteelEye Protection Suite for Linux175