Specifications

Storage and Adapter Configuration
Item Description
TID MassCareRAID
This storage unit was tested by a SIOS
Technology Corp. partner with the following
single path configuration:
l
Host1 Qlogic QLE2562 (HBA BIOS 2.10, driver
version qla2xxx-8.03.01.04.05.05-k *)
l
Host2 HP AE312A (HBA BIOS 1.26, driver version
qla2xxx-8.03.01.04.05.05-k *)
l
The test was performed with LifeKeeper for Linux
v7.3 using Red Hat Enterprise Linux5.5
(kernel2.6.18-194.el5)
LifeKeeper for Linux can support up to 11 LUNs in
a single cluster with the TID MassCareRAID array.
TIDMassCareRAIDⅡ
This storage unit was tested by a SIOS
Technology Corp. partner organization in a
multipath configuration using the Qlogic driver
with SCSI-2 reservations with no Fibre Channel
switches. Red Hat Enterprise Linux ES release
4 Update6 was used with the 2.6.9-67.ELsmp
kernel. The FAILFASTTIMER setting in
/etc/default/LifeKeeper needs to be changed
from 5 to 30.
Sun StorageTek 2540
This storage unit was tested by a SIOS
Technology Corp. partner organization, in a
multipath configuration using RDAC with Dual
RAID Controllers, using the StorageTek 4Gb
PCI-E Dual FC Host Bus Adapter and the Sun
StorageTek 4Gb PCI Dual FC Network Adapter.
QLogic Drivers
For other supported fibre channel arrays with
QLogic adapters, use
theqla2200orqla2300driver, version 6.03.00 or
later.
Emulex Drivers
For the supported Emulex fibre channel HBAs,
you must use thelpfcdriver v8.0.16 or later.
Adaptec 29xx Drivers
For supported SCSI arrays with Adaptec 29xx
adapters, use theaic7xxxdriver, version 6.2.0 or
later, provided with the OS distribution.
96Configuration