Specifications
Storage and Adapter Configuration
Item Description
Fujitsu ETERNUS3000
This storage unit was tested by a SIOS
Technology Corp. partner organization in a
single path configuration only, using the PG-
FC105 (Emulex LP9001), PG-FC106 (Emulex
LP9802), and PG-PC107 host bus adapters and
thelpfcdriver v7.1.14-3.
Fujitsu ETERNUS 6000
This storage unit was tested by a SIOS
Technology Corp. partner organization in a
single path configuration only, using the PG-
FC106 (Emulex LP9802) host bus adapter and
thelpfcdriver v7.1.14-3.
Fujitsu FibreCAT S80
This array requires the addition of the following
entry to/etc/default/LifeKeeper:
ADD_LUN_TO_DEVICE_ID=TRUE
Fujitsu ETERNUS SX300
This storage unit was tested by a SIOS
Technology Corp. partner organization in a
multipath configuration only using the PG-FC106
(Emulex LP9802) and PG-FC107 host bus
adapters and thelpfcdriver v7.1.14. The RDAC
driver that is bundled with the SX300 is required.
Fujitsu ETERNUS2000 Model 50
This storage unit was tested by a SIOS
Technology Corp. partner organization in a
multipath configuration with dual RAID
controllers using the PG-FC202 (LPe1150-F)
host bus adapter with the EMPD multipath
driver. Firmware version WS2.50A6 and driver
version EMPD V2.0L12 were used in the
testing. Testing was performed with LifeKeeper
for Linux v6.2 using RHEL4 (kernel 2.6.9-
67.ELsmp) and RHEL5 (kernel 2.6.18-53.el5).
Fujitsu ETERNUS4000 Model 300
This storage unit was tested by a SIOS
Technology Corp. partner organization in a
multipath configuration with dual RAID
controllers using the PG-FC202 (LPe1150-F)
host bus adapter with the EMPD multipath
driver.
94Configuration