Specifications

Storage and Adapter Configuration
Item Description
IBM DS3500
(FC Model)
Certified by SIOS Technology Corp. in single
path and multipath configurations on Red Hat
Enterprise Linux Server Release 5.5 (Tikanga),
HBA: QLE2560, QLE2460, RDAC: RDAC
09.03.0C05.0331. RDAC is needed for both
single path and multipath.
Note: SAS and iSCSI connect are not
supported.
IBM DS3400 Storage
Certified by SIOS Technology Corp. with QLogic
2300 adapters in both single and multiple path
configurations. Use
theqla2200orqla2300driver, version 6.03.00 or
later, as defined by IBM. Please refer to the
table entry for IBM DS4000 Storage for more
information on single and multiple path support.
IBM System Storage DS3300
Certified by SIOS Technology Corp. with iSCSI
Software Initiators. This storage device works
in a two node LifeKeeper cluster in both single
and multipath configurations. It is required that
the IBM RDAC driver be installed on both
servers for either single or multipath
configurations. If you are using a multipath
configuration, you must set SCSIHANGMAX to
50 in the /etc/default/LifeKeeper file.Please
consult the IBM website to obtain the supported
RDAC drivers for your distribution.
IBM System Storage DS3200
Certified by SIOS Technology Corp. with the
IBM SAS HBA (25R8060). This storage device
works in a two node LifeKeeper cluster in both
single and multipath configurations. It is
required that the IBM RDAC driver be installed
on both servers for either single or multipath
configurations.Please consult the IBM website
to obtain the supported SAS and RDAC drivers
for your Linux distribution.
IBM DS400
Certified by SIOS Technology Corp. in single
path configurations only. Use the firmware
version 7.01 build 0838 or later, as defined by
IBM.
IBM San Volume Controller (SVC)
Certified by partner testing in a single path
configuration. Certified by SIOS Technology
Corp. in multipath configurations using the the
Device Mapper Multipath Recovery Kit.
SteelEye Protection Suite for Linux87