Installation guide

Contents
1. Introduction ................................................................ 6
1.1 Overview ..........................................................................6
1.2 Subsystem Naming Rule .....................................................8
1.3 Locations of the Subsystem Component ................................9
1.3.1 SAS RAID Subsystem Front View .....................................9
1.3.2 SAS RAID Subsystem Rear View .................................... 10
1.3.2.1 Rear View of Fibre to SAS RAID Controller .................. 11
1.3.2.2 Rear View of SAS to SAS RAID Controller ................... 11
1.3.2.3 Rear View of iSCSI to SAS RAID Controller ................. 12
1.3.2.4 Expander Output .................................................... 12
1.3.2.5 Global Status ......................................................... 13
1.3.2.6 Power Supply/Cooling Fan LED ................................ 13
1.4 SAS RAID Subsystem Alarm .............................................. 14
1.5 Expansion Connection ....................................................... 15
2. Hardware Installation ............................................... 17
2.1 Installing an Subsystem into the Rack or Tower (Option) ....... 18
2.2 Installing or Removing SAS/SATA Drives in the Subsystem .... 19
2.2.1 Installing SAS/SATA Drives in the Enclosure .................... 20
2.2.2 Installing SATA Drives with Interposer Board ................... 21
2.2.3 Removing Drives from the Enclosure .............................. 24
2.3 Installing or Removing the SAS Series RAID Controller in the
Subsystem ........................................................................... 24
2.3.1 Installing the SAS RAID Controller in the Subsystem ........ 24
2.3.2 Removing the SAS RAID Controller from the Subsystem ... 25
2.3.3 Check Controller Memory Module ................................... 26
2.3.3.1 Installing the DDR-2 SDRAM DIMM............................ 26
2.3.3.2 Removing the DDR-2 SDRAM DIMM ........................... 27
2.3.4 Adding a Battery Backup Module (Option) ....................... 27
2.4 Installing and Removing the Power Supply/Cooling Fan Modules
.......................................................................................... 27
2.4.1 Installing the Power Supply/Cooling Fan Modules ............. 27
2.4.2 Removing a Power Supply/Cooling Fan Modules ............... 28
2.5 Installing the Power Cord Clamp ........................................ 28
2.6 Connecting the RAID Subsystem ....................................... 30
2.6.1 Connecting to Host System .......................................... 30
2.6.2 Connecting Monitor Port ............................................... 30
2.6.3 Power Up the RAID Subsystem ..................................... 32
2.7 Conguring RAID Subsystems ............................................ 32