Installation guide

APPENDIX

• 1 LAN RJ-45 connector

• 2 SAS CH0&CH1 connector for SAS to SAS RAID controller

LED Indicators

Hard-drive carrier

• 1 single-color activity LED status indicator

• 1 two-color fault/power LED status indicator

Controller board

• 2 single-color LED status indicators for each SAS expander port,

one for link and one for the activity status

Host board

• 2 single-color LED status indicator per SAS host

• 2 single-color LED status indicator per Fibre host

• 2 single-color LED status indicators per iSCSI host

Power supply/cooling fan module

• 2 single-color LED status indicators for AC_OK and FAULT on

each power supply/cooling fan module

Power Supplies

Dual hot swap and redundant with PFC, N+1 design

• Wattage 595 W maximum continuous;

• Voltage 100–240 V rated

• Frequency 50–60 Hz

• Amperage (Max) 6.18A (120 VAC), 3.23A (230 VAC)

Dimensions

2U 12 bays 19-inch rackmount chassis

• Without handles 88.2(H) x 445(W) x 506(D)mm

• With handles 88.2(H) x 482(W) x 542(D)mm

3U 16 bays 19-inch rackmount chassis

• Without handles 132.6(H) x 445(W) x 506(D)mm

• With handles 132.6(H) x 482(W) x 542(D)mm

Subsystem Net Weight (Without Drives)

• Single 12/16 bays 16.5 kg/20.7 kg

• Dual 12/16 bays 17.5 kg/21.7 kg