Installation guide

APPENDIX
36
• Automatic synchronization of rmware version in the dual-active
mode
• Multi-path & load-balancing support (Microsoft MPIO)
• Max 122 devices
• Max 128 LUNs (volume set) per controller
Monitors/Notication
• LCD Control Panel for setup, alarm mute and conguration
• System status indication through LCD, LED and alarm buzzer
• Subsystem management ready
Drive Interface
• Up to 122 devices using SAS expanders (one external Mini SAS
4x connector)
• Up to 6Gb/s per port
Host Interface
• 8Gb Fibre-to-SAS
Four 8Gb/s Fibre Channels - 800MB/sec per channel
• 6Gb SAS-to-SAS
Two Mini SAS 4x 6Gb/s SAS Ports - 600MB/sec per PHY link
• 1Gb iSCSI-to-SAS
Four 1Gb/s Ethernet Channel - Full iSCSI ofoad (complete
ULP, TCP ofoad )
RAID Management
• Field-upgradeable rmware in ash ROM
• Firmware-embedded manager via RS-232 port
• Firmware-embedded web browser-based RAID manager-
access your RAID subsystem from any standard internet brows-
er via 10/100/1000 LAN port
• Firmware-embedded SMTP manager monitors all system events
and user can select either single or multiple user notications to
be sent via “Plain English” e-mails
• Firmware-embedded SNMP agent allows remote to monitor
events via 10/100/1000 LAN with no SNMP agent required
• Access terminal menu by telnet via 10/100/1000 LAN port
• API library for customer to write its own monitor utility
• SAP management utility to easily manage multiple RAID units
in the network