Installation guide

HARDWARE INSTALLATION

• Method 3: LAN Port Connection

For additional information on using the LAN port to congure

the RAID subsystem see the Chapter 6 of Web Browser-Based

Conguration on the user manual.

2.7.2 Format, Partition and Mount the SAS RAID

Subsystem Volumes

Safety checks the installation. Connect all power cords. Turn on

the AC power switch at the rear of host computer then press the

power button at the front of the host computer.

After you create a unit, it needs to be partitioned, formatted,

and mounted by the operating system. There are various steps,

that depend on what operating system you are using (Windows,

Linux, FreeBSD or Mac, etc.). Detailed steps for each operating

system are provided on their disk utility. After that, the SAS RAID

subsystem can be fully used.