Installation guide
HARDWARE INSTALLATION
31
• RS232C Port Connection
The SAS RAID subsystem can be congured via a VT-100
compatible terminal or a PC running a VT-100 terminal
emulation program. You can attach a serial (Character-Based)
terminal or server com port to the SAS RAID subsystem for
access to the text-based setup menu. There are two multiple
function on those RJ11. The J3 jumper is on the controller
board used to dene the RS 232 port connectors (VT-100 for
expander/Debug and VT-100 for controller) function.
J3 jumper RJ11 Beside Expander Port RJ11 Beside LAN Port
1-2 Controller Debug Port Expander Port
3-4 (Default) Expander Port Controller VT-100 Port
No Cap Controller Debug Port Controller VT-100 Port
Table 2-1, RS232C port function denition
• LAN Port Connection
The SAS RAID subsystem has embedded the TCP/IP & web
browser-based RAID manager in the rmware(method 3).
User can remote manage the SAS RAID subsystem without
adding any user specic software (platform independent) via
standard web browsers directly connected to the 10/100/1000
Ethernet RJ45 LAN port. Connect Ethernet port of the SAS RAID
subsystem using the included Ethernet cable and then to a LAN
port or LAN switch.