Installation guide

HARDWARE INSTALLATION
21
Note:
To ensure proper airow for enclosure cooling, each slot
should contain a drive tray.
3. Click the drive tray latch into position, then continuing to slide
the other drive tray into the slot.
2.2.2 Installing SATA Drives with Interposer
Board
The interposer board is for usage with SATA drives. It provides
dual data path for redundant controller. If your enclosure has
two SAS RAID controllers and you are installing SATA drives, an
interposer board is required so that both expander modules can
4. Turn the key-lock to the proper position, using the “Star
Wrench L-Handle“ in the shipping box. The key-lock is unlock, if
the dot on its face is in the unlock orientation.