Installation guide

HARDWARE INSTALLATION

2. Hardware Installation

The following sections show the 12 bays RDL-BS12S6-R2/RDL-

BD12S6-R2 installation. An installation with the 16 bays RDL-

BS16S6-R3/RDL-BD16S6-R3 is exactly the same. This chapter

explains how to install the following components:

• Rack installation

• Drives and drive carriers

• SAS RAID controller boards

• Power supplies

Unpack

Unpack and install the hardware in a static-free environment. The

SAS RAID subsystem is packed inside an anti-static bag between

two sponge sheets. Remove it and inspect it for damage. If the SAS

RAID subsystem appears damaged, or if any items of the contents

listed below are missing or damaged, please contact your dealer or

distributor immediately.

Checklist

The SAS RAID subsystem kit may have included the following items

in the ship package:

• SAS RAID subsystem

• RAID rack kit

• Mounting hardware (attachment rails, screws, etc.)

• SFF-8088 to SFF-8088 cable (option)

• Power cords and power cord clamps

• RJ11 to DB9 serial communications null-modem cable

• Installation Guide (User Manual in the production CD)

Installing into a Subsystem Rack

Before you install the rack for your SAS RAID subsystem, please

make sure you have these rack kit components:

• One pair of mounting-bracket rail

• One pair of length rail

• 10-32 x 0.5-inch ange-head Phillips screws (8)