Installation guide

INTRODUCTION
16
● Redundant Controller Mode
The following table is the max no. of Fibre/SAS/iSCSI to 6Gb/s SAS
RAID subsystem supported:
Disks/
Subsystem
Expander Devices/Controller Volume
Max No. 32 8 122 128
Note:
1. Turn on the SAS RAID subsystem rst to make sure the host
adapter on the server recognizes the drives in the subsystem.
2. Turn on the JBOD rst to make sure the SAS RAID
subsystem recognizes the drives in the JBOD.