Installation guide

INTRODUCTION
11
1.3.2.1 Rear View of Fibre to SAS RAID Controller
The following table describes the Fibre to 6Gb/s SAS RAID sub-
system host channel link/activity LED.
Fibre Host Port LED Status
Link LED
(Green light)
When link LED is illuminated light that indicates the
Fibre channel host link has connected.
Activity LED
(Blue light)
The Fibre channel host accesses to the Fibre to SAS
RAID subsystem.
1.3.2.2 Rear View of SAS to SAS RAID Controller
The following table describes the SAS to 6Gb/s SAS RAID sub-
system host channel link/access LED.
SAS Host Port LED Status
Link LED
(Green light)
When host port link LED is illuminated for 1 second and
turns off for 3 seconds that indicates the one link has
connected.
When host port Link LED is illuminated for 2 seconds
and turns off for 2 seconds that indicates the two links
have connected.
When host port Link LED is illuminated for 4 seconds
that indicates the four links have connected.
Access LED
(Blue light)
When access LED is illuminated that indicates the SAS
host accesses to the SAS to SAS RAID subsystem.