Installation guide

INTRODUCTION
10
1.3.2 SAS RAID Subsystem Rear View
● 2U-12 bays SAS RAID Subsystem Rear View
● 3U-16 bays SAS RAID Subsystem Rear View
LED Normal status Problem Indication
Blue LED
(Activity)
When the activity LED
is illuminated, there is
I/O activity on that disk
drive. When the LED is
dark; there is no activity
on that disk drive.
N/A
Green/Red LED
(Power/Fault)
When the power LED
(green) is solid illumi-
nated and fault LED (red)
is off, that disk is present
and status normal.
When the fault LED is
solid illuminated there is
no disk present.
When the fault LED (red) is slow
blinking (2 times/sec), that disk
drive has failed and should be
hot-swapped immediately.
When the activity LED (blue) is
illuminated and fault LED (red)
is fast blinking (10 times/sec)
there is rebuilding activity on
that disk drive.