User manual

FIBRE-to-SAS/SATA RAID SUBSYSTEM
User Manual
89
6.6 Rebuilding a RAID
You can rebuild a RAID from the RAID Functions Î Rebuild RAID Set screen, as
follows:
NOTE: A RAID can only be rebuilt if it is in a degraded state. To
verify a RAID refer to Section on Verifying a RAID.
1. Select the RAID you wish to rebuild by clicking on the Rebuild button in
the row of the RAID of interest.
2. To stop the rebuild of a RAID, select the Stop button in the row of the
rebuilding RAID.