User manual

FIBRE-to-SAS/SATA RAID SUBSYSTEM
64
User Manual
Logical Volumes
Field Description
Logical Volume The name of the Logical Volume.
Serial Number The Logical Volume Serial Number assigned by the
system.
Capacity (GB) Capacity in Gigabytes of the Logical Volume.
Status Shows the Logical Volume Status, such as Global or
Private.
RAID The name of the RAID on which the Logical Volume was
created.
Hosts
Field Description
Host Name The name of the Host
Node Name Node ID of the initiator.
Port Name Port Name of the initiator.
Port 1A The current Login status of the host to Port A of
Controller 1. If the host is logged in to the controller
port then the Address or ALPA will be displayed. In
fabric and point-to-point modes, this field is referred to
as Address. In loop mode this field contains the ALPA. It
represents the ID of the host when connected to the
SAN.
Port 1B The current Login status of the host to Port B of
Controller 1. If the host is logged in to the controller
port then the Address or ALPA will be displayed. In
fabric and point-to-point modes, this field is referred to
as Address. In loop mode this field contains the ALPA. It
represents the ID of the host when connected to the
SAN.
Port 2A The current Login status of the host to Port A of
Controller 2. If the host is logged in to the controller
port then the Address or ALPA will be displayed. In
fabric and point-to-point modes, this field is referred to
as Address. In loop mode this field contains the ALPA. It
represents the ID of the host when connected to the
SAN.
Port 2B The current Login status of the host to Port B of
Controller 2. If the host is logged in to the controller
port then the Address or ALPA will be displayed. In
fabric and point-to-point modes, this field is referred to
as Address. In loop mode this field contains the ALPA. It
represents the ID of the host when connected to the
SAN.