User manual

FIBRE-to-SAS/SATA RAID SUBSYSTEM

User Manual

Expanders

Field Description

Status Displays the expander status, may be OK, critical, non-

critical, unrecoverable and unsupported.

Enclosure The ID of the enclosure where the expander is located

in.

Slot Slot in the enclosure where the expander is located in.

Expander Model Model number of the expander.

Serial Number Manufacturer’s unique serial number of the expander.

Firmware Version of firmware on the expander.

RAIDs

Field Description

Name The name of the RAID

Profile Defines the general operating or application

environment in which the RAID will be used (e.g. one

RAID volume might be optimized for database

applications while another might be optimized for file

server applications). This is configured when the RAID is

created.

State The states available for RAIDs are:

 Good

 Degraded

 Rebuilding

 Initializing

 Expanding

 Verifying

 Inaccessible

If the RAID is Rebuilding, Initializing, Expanding or

Verifying, the progress of the task will be displayed in

brackets, e.g. ‘Initializing (75%)’.

Level The RAID level selected when the RAID was

created. The current options available are RAID levels

0, 1, 5, 6 and 10. A RAID 10 will be displayed as a

RAID 1.

Capacity Capacity in Gigabytes of the RAID.