User manual

FIBRE-to-SAS/SATA RAID SUBSYSTEM
58
User Manual
5.1.2 Connecting with proRAID Manager Using DHCP
DHCP stands for Dynamic Host Configuration Protocol. It is a protocol used by
networked devices to obtain various parameters necessary for the clients to
operate in an Internet Protocol (IP) network. By using this protocol, system
administration workload greatly decreases, and devices can be added to the
network with minimal or no manual configurations therefore less effort.
By default, DHCP is enabled on the controller(s) and therefore no further
configuration is needed.
Once the RAID subsystem obtains the dynamic IP address from DHCP server, use
the IP address in your web browser to open proRAID Manager.