User manual

FIBRE-to-SAS/SATA RAID SUBSYSTEM
136
User Manual
9.11 Config Save/Restore
The Administration Î Config Save/Restore screen can be used to restore a
backup controller configuration.
This screen contains the following buttons:
Field Description
Restore
COD
Restores an automatically saved configuration from the disks
currently available in the enclosures. The system will reset itself
when the restoration is complete.
Save Downloads one of two saved system configurations.
Restore
Prompts the user for the location of a previously saved
configuration. The system will need to be reset for the restored
configuration to take effect.
Warning: This facility should only be used under the direction of
our technical support team.